# Asphalt Sealer Calculator

> Calculate how many gallons of asphalt sealer you need for your driveway or parking lot

**Category:** Construction
**Keywords:** asphalt, sealer, sealcoat, gallons, coverage, driveway, maintenance
**URL:** https://complete.tools/asphalt-sealer-calculator

## How it calculates

The calculation for determining the gallons of asphalt sealer needed can be expressed as follows: 

Gallons of Sealer = Total Area (sq ft) ÷ Coverage Rate (sq ft/gallon). 

In this formula, 'Total Area' refers to the surface area that needs to be sealed, measured in square feet. 'Coverage Rate' is the amount of area that one gallon of asphalt sealer can cover, also measured in square feet per gallon. The relationship indicates that as the total area increases or as the coverage rate decreases, more gallons of sealer will be needed. The calculator performs this division to yield the total gallons required, which may be rounded up to ensure complete coverage.

## Who should use this

Paving contractors estimating materials for asphalt maintenance projects, property managers determining sealer needs for commercial parking lots, and homeowners assessing the amount of sealer required for residential driveways.

## Worked examples

Example 1: A homeowner wants to seal a driveway measuring 20 feet wide and 50 feet long. First, calculate the total area:
Total Area = Width × Length = 20 ft × 50 ft = 1000 sq ft.
Assuming the coverage rate of the sealer is 150 sq ft/gallon:
Gallons of Sealer = Total Area ÷ Coverage Rate = 1000 sq ft ÷ 150 sq ft/gallon = 6.67 gallons.
The homeowner would need to purchase 7 gallons of sealer, rounding up for complete coverage.

Example 2: A property manager needs to seal a parking lot measuring 100 feet by 200 feet. Calculate the area:
Total Area = 100 ft × 200 ft = 20,000 sq ft. 
If the coverage rate is 250 sq ft/gallon:
Gallons of Sealer = 20,000 sq ft ÷ 250 sq ft/gallon = 80 gallons. 
The property manager should order 80 gallons of sealer to adequately cover the entire parking lot.

## Limitations

The Asphalt Sealer Calculator has several limitations. First, the coverage rate can vary significantly based on surface texture and porosity, which may lead to inaccurate estimates if the user relies on average values. Second, the tool assumes uniform application without overlaps or gaps, which may not be the case in practical scenarios. Third, the calculator does not account for environmental factors such as temperature and humidity that can affect drying time and application efficacy. Lastly, if the total area is less than the minimum coverage rate, the tool may not provide an accurate figure, leading to potential underestimation of sealer needs.

## FAQs

**Q:** How do variations in surface texture affect the sealer coverage rate?


**A:** Variability in surface texture can significantly impact how much sealer is absorbed by the asphalt, with rough or porous surfaces typically requiring more sealer than smooth surfaces.


**Q:** Can this calculator be used for different types of sealers?


**A:** Yes, but the user must ensure they have the correct coverage rate for the specific type of sealer being used, as different products can have varying coverage capabilities.


**Q:** What should be done if the calculated gallons exceed the container sizes available?


**A:** Users should round up the total gallons needed and purchase multiple containers, ensuring they have enough sealer without exceeding the capacities of available sizes.


**Q:** Is there a recommended method for applying asphalt sealer?


**A:** Yes, it is advisable to apply sealer using a squeegee or spray method for even coverage, with multiple thin coats often recommended to enhance durability and appearance.

---

*Generated from [complete.tools/asphalt-sealer-calculator](https://complete.tools/asphalt-sealer-calculator)*